Schneider – Bộ Điều Khiển Đèn ON OFF 8 kênh – Switch actuator REG-K/8×230/10 with manual mode, light grey

Bộ Điều Khiển Đèn ON/OFF 8 kênh – Switch actuator REG-K/8×230/10 with manual mode, light grey

You can use the central function to switch or dim several output channels simultaneously with a telegram command. This function is useful, for example, when you wish to switch off all lights at the touch of a button before going to bed in the evening, or when you leave your apartment.

After the function has been enabled, the “Central object” communication object appears, which can now be used to receive the central control telegrams.
Now you can activate the central function for each switching channel individually:

After the “Central function” parameter has been enabled, an output is switched on and off by the
“Central object” when a telegram is received.
Priority
The central function has the same priority as the normal switching function. When a new object value is received via the “Central object”, the effect is the same as when a new object value is received for the “Switching object” of the channel. Accordingly, all the assigned channel functions (e.g. time functions, logic operation function) are also executed.

For independent switching of up to 8 loads via make contacts.

The function of the switching channels is freely confgurable. All switching outlets can be operated manually using pushbutton operation.
Channel status display via LEDs. A green LED indicates readiness for operation.
With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.
KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function.
Disable function. Logic operation or priority control. Status feedback function for each channel.
Power supply:
Nominal voltage: AC 230 V, 50-60 Hz
For each switch output:
Nominal current: 10 A, cosφ = 1; 10 A, cosφ = 0.6
Incandescent lamps: AC 230 V, max. 2000 W
Halogen lamps: AC 230 V, max. 1700 W
Fluorescent lamps: AC 230 V, max. 1800 W, uncompensated
AC 230 V, max. 1000 W with parallel compensation
Capacitive load: AC 230 V, max. 105 µF
Device width: 4 modules = approx. 72 mm
Contents: With bus connecting terminal and cable cover.

Xem chi tiết thông số kỹ thuật chính hãng tạ: Data document link